Fold-A-Way Patio Doors

Finishes - Wood & Cellular PVC

Wood with a white factory applied water-based acrylic latex primer and white, paintable cellular PVC sill and blindstop.

Finishes - Wood

Wood with a white factory applied water-based acrylic latex primer.

Trim - Cellular PVC

Add that finishing touch to the exterior of your windows and patio doors by trimming them with the many brickmould and casings offered by Lincoln. Along with richening the aesthetics of your home, these factory-applied trims reduce the installation labor and hassle.

Trim - Wood

Add that finishing touch to the exterior of your windows and patio doors by trimming them with the many brickmould and casings offered by Lincoln. Along with richening the aesthetics of your home, these factory-applied trims reduce the installation labor and hassle.

Wood Species

Nothing enhances the look and feel of a room more than the richness and beauty of wood. Our standard pine interior is fine for most applications, but if you are looking to really enhance the character of your project, we offer five additional wood species.

Finishes

Natural Wood

Lincoln will leave your interior wood surface sanded smooth, ready for stain and sealer.

Primed

If you plan to paint the interior of your windows and patio doors, you can have them primed with a white factory applied water-based acrylic latex primer.

FirstFinish

To take things a step further, we also offer FirstFinish - a factory applied secondary coat of water-based acrylic latex primer. FirstFinish is intended to prep the unit for the final top-coat of paint to be applied.

Jamb Extensions

When installing a window, increasing the depth of the window frame to accommodate the wall thickness is sometimes necessary. This can easily be accomplished with the use of jamb extensions available in all six wood species.

Mull Casings

This is an interior trim covering that hides the joinery between mulled window assemblies and is commonly used when purchasing an applied extension jamb. Mull casings are available to match our wood species.

The glass in windows and patio doors has the single largest effect on energy efficiency. Lincoln’s standard insulated glass offering includes double strength glass combined with a warm edge spacer. For greater energy efficiency, argon is added to all Low-E glass units, at no cost to the customer, with the exception of those units requiring capillary/breather tubes. These units include, but are not limited to, glass 12” and less in width or height and units shipped over high elevations. Lincoln does not guarantee that the initial argon fill rate will be maintained over the life of the product. Argon depletion may decrease energy efficiency. For more information, contact your local dealer or Lincoln Wood Products, Inc.

Overall insulated glass dimensions are 11/16” on double hungs, 7/8” on casements and 3/4” on patio doors. Choose Lincoln’s standard glass or a combination of energy efficient, low maintenance and specialty glass options for appearance, performance and comfort.

Energy Efficient Options

• Clear I.G.
• LoĒ²
• LoĒ³-366™/Neat®
• Dual Low-E/LoĒ²
• Dual Low-E/LoĒ³366™/Neat®

Low Maintenance Options

• Neat®
• Preserve®

Specialty Options

• Patterned
• Tinted
• Safety

LoĒ², LoĒ³-366™, Neat® and Preserve® are trademarks of Cardinal IG.

There are not only choices in the glass itself, there’s also variation in glazing. Here is another opportunity to have your windows and doors made to fit the interior design, décor and style of the room. Additionally, the exterior interacts with the overall architecture and creates fantastic curb appeal. Enhancing windows and doors with lite divisions definitely puts the icing on the cake. Although there are standard lite configurations designated for all products, custom designs are also welcome.

Simulated Divided Lites

Windows and doors may be enhanced with simulated divided lites. Both the interior wood bars and the exterior aluminum bars are sealed to the glass with 3M adhesives. Exterior bars are primed and ready for paint.

Simulated divided lite products may be ordered with or without an internal aluminum gridwork; internal grille choices include mill finish and bronze. Simulated divided lites are available in 7/8”, 1-1/8” and 2” bar widths.

Exterior Bars

Interior Wood Grilles

Interior wood grilles are available in single profile widths of 5/8”, 1”, and 1-1/4” and in a double profile width of 7/8”. With or without a surround is an additional choice. Interior grilles offer the convenience of removal for the cleaning of interior glass. There is no obstruction to the exterior glass.

Single Profile

Double Profile

Internal Aluminum Grilles

Another unobstructive manner of lite division is the addition of an internal aluminum grille. Inserted at time of insulated glass fabrication, internal aluminum grilles are 11⁄16” double profile and are available in all eight of our standard clad colors and six two-toned options. Two-toned colors are matched with white.

Standard Colors

Two-Toned Colors

Lincoln Divided Lites

Authentic lite division produced with 7/8” and 1-1/4” bar widths, Lincoln Divided Lites are produced as primed units only. Utilizing the 1-1/4” bar enables the product to encompass insulated glass. The 7/8” bar, however, is only available in single glazed units.

Patterns

Cottage

Colonial

Victorian

Queen Anne

Parabolic

Apex

Diamond

Prairie

A fully integrated retractable insect screen is available for openings up to 24 feet wide and 9 feet high. The load balanced system opens and closes effortlessly and remains firmly in any chosen position until further pressure is applied.

The screen is manufactured entirely in stainless steel, brass and reinforced engineering polymers. The tough PVC-coated polyester mesh used in the screen is hard wearing, resistant to damage, easy to clean and can be replaced if necessary.

Handles & Backplates

HOPPE®

Take the customization of your swing doors to another level with six handle options and four choices of backplates and a selection of twelve finishes. Our standard handle set is the München handle with M374N backplate in Polished Brass, but you have the option of mixing and matching handles, backplate styles and finishes to create a door design that’s truly inspiring. NOTE: Not all handles can be combined with all backplates. See the chart below for available combinations.

Our handles are manufactured using the finest quality brass alloys. The surface of the handle, except Oil-Rubbed, is protected by a transparent enamel finish which offers strength and durability as well as a smooth, blemish free surface. Oil-Rubbed has a “live” finish that changes over time.

Finishes for the Athinai handle set are limited. See the chart below for available finishes. Split-finish handle sets (backplate and base of handle are first finish and end of handle is second finish) of Polished Brass/Brushed Brass and Polished Chrome/Brushed Stainless Steel are not shown but are also available.

Want these handle sets throughout your home? A variety of matching interior door handle sets are available. Please contact HOPPE® directly at 1-888-485-4885 or info@us.hoppe.com for more information.

Strike plates match the handle sets. Handle set options are identical for out-swing doors. However, the only offering for the strike plate and locked pin hinges is Stainless Steel.

HOPPE® Bronze

Want a handle set that will make your patio door extraordinary? Hoppe® Bronze will do just that. Each handle set has a “live” finish that changes over time. To achieve this unique finish, the cast bronze alloy is tumbled in rocks and water and given a patina finish through oxidation and hand-rubbed with oils and waxes.

These handle sets are available in Antique Bronze or Dark Bronze, with a New Orleans or Missoula handle and a B2161 or B3741 backplate.

Hinges

Lincoln Swing Patio Doors come standard with adjustable, corrosion resistant hinges and are equipped with non-removable pins for security. PLEASE NOTE: Removal of the door will require unscrewing the hinge from the frame or door panel. Available finishes match HOPPE® handle sets. In-Swing patio doors come standard with Gold Powder Coat finished hinges. Standard for Out-Swing patio doors is Brushed Chrome.

Standard Finishes

Bifold Components

Track, Guide Channel and Sill

The Fold-A-Way Patio Door is a top mounted track system allowing the weight of door to be carried on the header. The bottom guide glides with minimal effort in a polypropylene floor channel lining allowing a smooth, almost silent rolling action. A low threshold guide channel is available for internal applications - no obtrusive door sill, just a recessed track in the floor.

Carriers, Guides and Pivots

Carriers, guides and pivots use the highest grade stainless steel rollers and bearings. Floor guides and floor pivots are offset so the floor guide channel is located directly under the door panels when they are closed. This system is beneficial from an aesthetic perspective and reduces the opportunity for dust and debris to enter the channel.

Handles, Hinges and Dropbolts

Our doors include heavy-duty pull handles and hinges. Door panels come standard with three hinges, a fourth is added for doors over 7’4”. Flush-mounted dropbolts firmly anchor the door panels when closed.

One of the best ways to change or improve the look of a home is to alter the patio door configuration. Our vast offering of patio door styles allows for configurations from traditional to contemporary and everything in between. The samples shown below are just a handful of what's possible. Whether you want a simple sidelite combination or are looking to make a statement by combining standard patio doors with specialty shapes, we can meet your needs.

NOTES:

You must have Adobe Acrobat Reader installed on your computer to view PDF documents. You can download the latest free version of Acrobat from Adobe's website.

If you do not have a CAD program installed on your computer, DXF files can be viewed in CAD viewing programs such as DWG TrueView. You can dowload the latest free version of TrueView from Autodesk's website.

Firefox users - To view DXF files, you must either use Internet Explorer or right-click on the link, Save Target As to your computer and open the file from there.

If you cannot find what you are looking for or if you need more information, feel free to contact us.

Architectural Details

CAD Drawings

Cross Sections

Elevations

Dimensioned Cross Sections